Technical Parameters
| Cryo Handle Number |
2 working handles |
| Screen |
10.4 inch touch screen |
| Cooling Temperature |
-13°C/+43°C (Warm up to 43°C in the first three minutes, and then start cooling, the lowest temperature can reach -13°C ) |
| Vacuum Output Pressure |
0-100Kpa |
| Cooling Liquid |
Pure water |
| Cooling System |
Water cooling+Air cooling+Semiconductor |
| Default Working Time |
0-60 minutes |
| Machine Power |
1600W |
| Package Size |
64cm*45cm*103cm |
| Voltage |
220V/50Hz or 110V/50Hz or 110V/60Hz |
| RF Frequency |
5M Hz |
| Cavitation Frequency |
40KHZ |
| Energy of RF |
0-50J/CM2 |
1. Theory
(1) Cryolipolysis (Fat Freezing)
Through cooling technology, triglyceride in fats will be converted into solid in particular low temperature. Fat cells premature aging and death. Through the normal metabolic processes to decrease the fat layer and achieve the purpose of partially melting fat.
(2) 40KHz Cavitation Vela Vacuum
This type of efficient heating and vacuum stimulates the growth of new and better collagen and elastin which results in localized reduction in skin laxity, body volume, and an overall improvement in skin structure and texture.
(3) Vacuum RF
The Vacuum RF series is a vacuum negative pressure,bipolar RF, infrared laser, skin folding, mechanical rolling technology instrument, suitable for all parts of the body of fat-dissolving, shaping the body, firming the skin, and physiotherapy equipment . It can efectively degrade the subcutancous fat cells into carbon dioxide and water, and at the same time promote the metabolism of the human body, greatly improving the effect of lipolysis, shaping and physiotherapy.
3. Cryo Handle Introduction (360.Refrigeration)
7 changeable handle cups, which can be choosed according to the treatment areas and fat thickness.
4 handle cups
for the mid handle:
1 180mm*70mm*43mm
2 190mm*70mm*43mm
3 210mm*70mm*43mm
4 220mm*70mm*50mm
Treatment areas: waist & thigh
3 handle cups
for the small handle:
5 125mm*55mm*45mm
6 140mm*55mm*45mm
7 150mm*55mm*45mm
Treatment areas: arms, thigh & crus
Operation Steps
1 Check the thickness of the fat.
2 Clean the treatment area.
3 Mark the size of treatment area.
4 Paste antifreeze membrane at treatment area.
5 Set the parameters to start the treatment(the following parameters for reference).
Thickness
|
Time |
Temperature
|
<20mm
|
60 min
|
0.C
|
20mm-40mm
|
45 min
|
-5.C
|
30mm-50mm
|
40 min
|
-8.C
|
50mm-60mm
|
40 min
|
-10.C
|
>60mm
|
40 min
|
-11.C
|
Treatment Procedure
1. Clean the treatment part.
2. Open the anti freezing membrane, and make sure the membranes is 100% contacting the treatment part.
3. Turn on the machine and adjust the parameter which you need(make it according to your clients real situation),
and start.
4. Turn on the start button on the working handle, and put the handle on the treatment part.
5. Setting treatment time 60mins, 50mins use continue mode, last 10mins use the pulse mode to relax the skin.
6. After doing the treatment, clean the treatment part is ok.
Why we choose Fat freezing Cryolipolyis?
Fat Cells After Typical Weight Loss:After dieting and weight loss, fat cells get smaller but the number of fat cells stays the same. When weight is gained, fat cells get bigger.
Fat Cells After The Cryolipolysis Procedure:The Cryolipolysis fat-freezing procedure actually reduces the number of fat cells in treated areas by about 20% to 25%. These fat cells are naturally processed and elim-inated, so they won't migrate to another area of your body.
Audited Supplier 
Technical Parameters
){kind=link}
){kind=link}